Modelling ripple morphodynamics driven by colloidal deposition
dc.contributor.author | Hewett JN | |
dc.contributor.author | Sellier M | |
dc.date.accessioned | 2020-09-22T04:19:22Z | |
dc.date.available | 2020-09-22T04:19:22Z | |
dc.date.issued | 2018 | en |
dc.date.updated | 2020-07-28T23:36:43Z | |
dc.description.abstract | © 2017 Elsevier Ltd Fluid dynamics between a particle–laden flow and an evolving boundary are found in various contexts. We numerically simulated the morphodynamics of silica particle deposition from flowing water within geothermal heat exchangers using the arbitrary Lagrangian–Eulerian method. The silica particles were of colloidal size, with submicron diameters, which were primarily transported through the water via Brownian motion. First, we validated the Euler–Euler approach for modelling the transport and deposition of these colloidal particles within a fluid by comparing our simulation results with existing experiments of colloidal polystyrene deposition. Then we combined this multiphase model with a dynamic mesh model to track the gradually accumulated silica along the pipe walls of a heat exchanger. Surface roughness was modelled by prescribing sinusoidally–shaped protrusions on the wall boundary. The silica bed height grew quickest at the peaks of the ripples and the spacing between the protrusions remained relatively constant. The rough surface experienced a 20% reduction in silica deposition when compared to a smooth surface. We also discuss the challenges of mesh deforming simulations with an emphasis on the mesh quality as the geometry changes over time. | en |
dc.identifier.citation | Hewett JN, Sellier M (2018). Modelling ripple morphodynamics driven by colloidal deposition. Computers and Fluids. 163. 54-67. | en |
dc.identifier.doi | http://doi.org/10.1016/j.compfluid.2017.12.017 | |
dc.identifier.issn | 0045-7930 | |
dc.identifier.issn | 1879-0747 | |
dc.identifier.uri | https://hdl.handle.net/10092/101072 | |
dc.language | en | |
dc.language.iso | en | |
dc.publisher | Elsevier BV | en |
dc.rights | All rights reserved unless otherwise stated | en |
dc.rights.uri | http://hdl.handle.net/10092/17651 | en |
dc.subject | Evolving boundary | en |
dc.subject | Node shuffle algorithm | en |
dc.subject | Particle deposition | en |
dc.subject | Silica scaling | en |
dc.subject | Dynamic mesh | en |
dc.subject.anzsrc | Fields of Research::40 - Engineering::4012 - Fluid mechanics and thermal engineering::401204 - Computational methods in fluid flow, heat and mass transfer (incl. computational fluid dynamics) | en |
dc.subject.anzsrc | Fields of Research::40 - Engineering::4012 - Fluid mechanics and thermal engineering::401210 - Microfluidics and nanofluidics | en |
dc.title | Modelling ripple morphodynamics driven by colloidal deposition | en |
dc.type | Journal Article | en |
uc.college | Faculty of Engineering | |
uc.department | Mechanical Engineering |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- 1801.02109v1.pdf
- Size:
- 1.37 MB
- Format:
- Adobe Portable Document Format
- Description:
- Accepted version