Fabrication of In-Channel High-Aspect Ratio Sensing Pillars for Protrusive Force Measurements on Fungi and Oomycetes

dc.contributor.authorSun Y
dc.contributor.authorTayagui A
dc.contributor.authorGarrill A
dc.contributor.authorNock V
dc.date.accessioned2019-04-07T23:58:27Z
dc.date.available2019-04-07T23:58:27Z
dc.date.issued2018en
dc.date.updated2019-03-04T01:47:55Z
dc.description.abstract© 1992-2012 IEEE. This paper reports the fabrication and application of a Lab-on-a-Chip platform containing single-elastomeric micropillars in channel constrictions, which enable the measurement of protrusive forces exerted by individual fungal hyphae. We show the device design, the fabrication process, and photoresist optimization required to adapt the microfluidic platform to relatively thin hyphae. To demonstrate the applicability of the devices, the oomycete Achlya bisexualis and the fungus Neurospora crassa were cultured on PDMS chips. Devices were combined with confocal imaging to study the interaction of A. bisexualis hyphae with the measurement pillars. The force exerted by individual hyphae of N. crassa was measured and compared with a hyphal growth rate and diameter. The platform provides a new tool to help understand the molecular processes that underlie protrusive growth and this may present new ways to tackle the pathogenic growth of these organisms and thus combat the loss of diversity that they cause. This paper is based on the conference proceedings presented at the 31st IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2018), Belfast. [2018-0090]en
dc.identifier.citationSun Y, Tayagui A, Garrill A, Nock V (2018). Fabrication of In-Channel High-Aspect Ratio Sensing Pillars for Protrusive Force Measurements on Fungi and Oomycetes. Journal of Microelectromechanical Systems. 27(5). 827-835.en
dc.identifier.doihttps://doi.org/10.1109/JMEMS.2018.2862863
dc.identifier.issn1057-7157
dc.identifier.issn1941-0158
dc.identifier.urihttp://hdl.handle.net/10092/16605
dc.language.isoen
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)en
dc.rightsThis work is licensed under a Creative Commons Attribution 3.0 License. For more information, see http://creativecommons.org/licenses/by/3.0/en
dc.subjectLab-on-a-chipen
dc.subjectforce sensoren
dc.subjectPDMS micropillarsen
dc.subjectfungi and oomycetesen
dc.subjectmicroelectromechanical systems (MEMS)en
dc.subject.anzsrcFields of Research::31 - Biological sciences::3107 - Microbiology::310705 - Mycologyen
dc.subject.anzsrcField of Research::06 - Biological Sciences::0607 - Plant Biology::060702 - Plant Cell and Molecular Biologyen
dc.subject.anzsrcFields of Research::40 - Engineering::4017 - Mechanical engineering::401705 - Microelectromechanical systems (MEMS)en
dc.titleFabrication of In-Channel High-Aspect Ratio Sensing Pillars for Protrusive Force Measurements on Fungi and Oomycetesen
dc.typeJournal Articleen
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Paper_FabIn-ChannelHigh-AspectSensPillProtForceMeasFungiOomycetes_Sun_JMEMS(2018).pdf
Size:
2.59 MB
Format:
Adobe Portable Document Format
Description:
Published version