Dimensional stability, fungal resistance and mechanical properties of radiata pine after combined thermo-mechanical compression and oil heat-treatment
Type of content
UC permalink
Publisher's DOI/URI
Thesis discipline
Degree name
Publisher
University of Canterbury. School of Forestry
Journal Title
Journal ISSN
Volume Title
Language
Date
Authors
Abstract
This study investigated the dimensional stability and mechanical properties of thermo-mechanically compressed radiata pine (Pinus radiata) wood followed by oil heat-treatment. Wood specimens were first compressed in the radial direction then heat-treated in a linseed oil bath at 160 to 210˚C. Spring-back percentage, water repellence efficiencies and compression set recovery percentage were determined to examine the dimensional stability. The resistance of treated wood against a brown rot fungi was assessed from an accelerated laboratory fungal decay test. Strength, stiffness and hardness were determined and effect of different treatments was analysed.
After thermo-mechanical compression of wood, high compression set (39%) was achieved without any surface checks and cracks. Specimens with thermo-mechanical compression followed by oil heat-treatment showed relatively less swelling and low compression set recovery in high moisture conditions. The fungal resistance of wood after the combined treatment of thermo-compression and oil heat-treatment also increased compared to untreated wood and wood treated using thermo-compression only. The mechanical properties of wood from combined thermo-mechanical compression and hot oil treatment were less than those of wood from “compressed only” but were still significantly better than those of the untreated wood.
Description
Citation
Keywords
Ngā upoko tukutuku/Māori subject headings
ANZSRC fields of research
Field of Research::07 - Agricultural and Veterinary Sciences::0705 - Forestry Sciences