The Effect of Cycle Lanes on Cycle Numbers and Safety

Type of content
Publisher's DOI/URI
Thesis discipline
Degree name
University of Canterbury. Civil and Natural Resources Engineering
Journal Title
Journal ISSN
Volume Title
Parsons, J.
Koorey, Glen

Marked on-road cycle lanes are a relatively inexpensive means of providing for cycling; however, their use in New Zealand has been questioned both in terms of their safety and their effectiveness in attracting more people to take up cycling. While both questions have been previously researched locally, the findings have been rather inconclusive.

A recent Engineering Masters research project investigated the relative effects on cycle count and crash numbers of installing a series of cycle lanes. Twelve routes installed in Christchurch during the mid-2000s were analysed, together with some control sites. Cycle count data from a series of route locations and dates were used to establish cycling trends before and after installation. These were also compared against cycle crash numbers along these routes during the same periods.

The results generally show no consistent "step" increase in cycling numbers immediately following installation of cycle lanes, with some increasing and decreasing. Changes on cycling growth rates were more positive, although it is clear that other wider trends such as motor traffic growth are having an effect. Taking into account the relative changes in volumes and controls, the study also found notable reductions in cycle crashes following installation, typically with a 23% average reduction in crash rates.

Parsons, J., Koorey, G. (2013) The Effect of Cycle Lanes on Cycle Numbers and Safety. Dunedin, New Zealand: IPENZ Transportation Group Conference 2013, 14-16 Apr 2013. 15pp.
Ngā upoko tukutuku/Māori subject headings
ANZSRC fields of research
Field of Research::12 - Built Environment and Design::1205 - Urban and Regional Planning::120506 - Transport Planning
Fields of Research::40 - Engineering::4005 - Civil engineering::400512 - Transport engineering