Expiratory model-based method to monitor ARDS disease state

Type of content
Journal Article
Thesis discipline
Degree name
Publisher
University of Canterbury. Mechanical Engineering
Journal Title
Journal ISSN
Volume Title
Language
Date
2013
Authors
Van Drunen, E.J.
Chiew, Y.S.
Chase, Geoff
Shaw, Geoff
Lambermont, B.C.
Janssen, N.
Damanhuri, N.S.
Desaive, T.
Abstract

Introduction: Model-based methods can be used to characterise patient-specific condition and response to mechanical ventilation (MV) during treatment for acute respiratory distress syndrome (ARDS). Conventional metrics of respiratory mechanics are based on inspiration only, neglecting data from the expiration cycle. However, it is hypothesised that expiratory data can be used to determine an alternative metric, offering another means to track patient condition and guide positive end expiratory pressure (PEEP) selection. Methods: Three fully sedated, oleic acid induced ARDS piglets underwent three experimental phases. Phase 1 was a healthy state recruitment manoeuvre. Phase 2 was a progression from a healthy state to an oleic acid induced ARDS state. Phase 3 was an ARDS state recruitment manoeuvre. The expiratory time-constant model parameter was determined for every breathing cycle for each subject. Trends were compared to estimates of lung elastance determined by means of an end-inspiratory pause method and an integral-based method. All experimental procedures, protocols and the use of data in this study were reviewed and approved by the Ethics Committee of the University of Liege Medical Faculty. Results: The overall median absolute percentage fitting error for the expiratory time-constant model across all three phases was less than 10 % for each subject, indicating the capability of the model to capture the mechanics of breathing during expiration. Provided the respiratory resistance was constant, the model was able to adequately identify trends and fundamental changes in respiratory mechanics. Conclusion: Overall, this is a proof of concept study that shows the potential of continuous monitoring of respiratory mechanics in clinical practice. Respiratory system mechanics vary with disease state development and in response to MV settings. Therefore, titrating PEEP to minimal elastance theoretically results in optimal PEEP selection. Trends matched clinical expectation demonstrating robustness and potential for guiding MV therapy. However, further research is required to confirm the use of such real-time methods in actual ARDS patients, both sedated and spontaneously breathing.

Description
Citation
Van Drunen, E.J., Chiew, Y.S., Chase, J.G., Shaw, G.M., Lambermont, B.C., Janssen, N., Damanhuri, N.S., Desaive, T. (2013) Expiratory model-based method to monitor ARDS disease state. BioMedical Engineering OnLine, 12:57, pp. 1-15.
Keywords
mechanical ventilation, model-based methods, expiration, ARDS, intensive care, time constant
Ngā upoko tukutuku/Māori subject headings
ANZSRC fields of research
Fields of Research::32 - Biomedical and clinical sciences::3201 - Cardiovascular medicine and haematology::320103 - Respiratory diseases
Field of Research::09 - Engineering::0913 - Mechanical Engineering::091399 - Mechanical Engineering not elsewhere classified
Fields of Research::32 - Biomedical and clinical sciences::3202 - Clinical sciences::320212 - Intensive care
Rights