Now showing items 67-86 of 98

    • Maintaining Fire-fighter Tenability in Unsprinklered Single-storey Industrial Buildings using Roof Venting 

      McDonald, Timothy Myles (University of Canterbury. Civil and Natural Resources Engineering, 2012)
      Roof venting is often utilised in large warehouses to remove smoke in order to reduce damage to a building and its contents, and to maintain access for fire-fighters. In New Zealand, the Compliance Document for the New ...
    • Mixing in Fire Induced Doorways Flows 

      Clement, J M (University of Canterbury. Civil Engineering, 1996)
      This report is a review of the mixing that occurs in fire induced gas flows through a doorway. The purpose of the report to provide a basis from which launch future experimental investigations. A detailed review is ...
    • Modelling Smoke Flow Using Computational Fluid Dynamics 

      Kardos, T N (University of Canterbury. Civil Engineering, 1996)
      There have been a number of experimental investigations into the backdraft phenomena. A backdraft occurs in the event of a ventilation source being formed in a compartment, within which a fire has been burning for a ...
    • New Zealand Building Regulations Five Years Later 

      Hubbard, Dennis B.; Pastore, Timothy M. (University of Canterbury. Department of Civil and Natural Resources Engineering, 1997)
      The objective of this Interactive Qualifying Project was to examine the educational system surrounding New Zealand's performance-based building code. This report addresses a basic history of the code and the associated ...
    • Node Network Computer Modelling and a Simple Hand Calculation Compared with Contemporary High Rise Evacuation Case Study Data 

      Hay, Garth Stephen (University of Canterbury. Civil and Natural Resources Engineering, 2012)
      Tall buildings are becoming more common in the modern built environment and the method of evacuating or moving to a place of safety using the stairs is still the primary means of egress. Typically designers use tools such ...
    • Numerical Modelling of Unchannelled Balcony Spill Plumes using using FDS 5 

      Tiong, Ho Yong (University of Canterbury. Civil Engineering, 2012)
      Currently there is limited design guidance for calculation that involves an unchannelled balcony spill plume. The current guidance for unchannelled spill plume can be obtained from CIBSE (TM19) and BS PD 7974 (Part 2). The ...
    • Peoples Awareness of Fire 

      Rusbridge, Sarnia J (University of Canterbury. Civil Engineering, 1999)
      A sample group of the Christchurch population was interviewed to discover if there were any trends in fire awareness and fire knowledge that were related to background characteristics. A variety of methods were used to ...
    • Performance of Gypsum Plasterboard Assemblies Exposed to Real Building Fires 

      Jones, Bevan (University of Canterbury. Civil Engineering, 2001)
      The performance of gypsum plasterboard assemblies is typically evaluated in accordance with standardised test methods such as BS476, AS1530 or ASTM E119. Standard time-temperature curves give good comparison between ...
    • Post-Flashover Design Fires 

      Feasey, R (University of Canterbury. Civil Engineering, 1999)
      This report reviews the modelling of post-flashover fires and compares the various methods of predicting temperature versus time in post-flashover compartment fires, including the historical development of theoretical ...
    • Predicting Evacuation Time from Lecture Theatre Type Rooms 

      Xiang, Xiaoxing (Primo) (University of Canterbury. Civil Engineering, 2007)
      The purpose of this research is to investigate the relationships between the movement time, travel speed and occupant density during trial evacuations, particularly for theatre-type rooms. The study mainly focuses on crowd ...
    • Predicting Ignition Time Under Transient Heat Flux Using Results from Constant Flux Experiments 

      Henderson, Alistair (University of Canterbury. Civil Engineering, 1998)
      This project investigated if ignition could be mathematically predicted when a material is subjected to a transient heat flux. Six timbers commonly used in New Zealand for construction and indoor furnishing timbers were ...
    • The Prediction of Smoke Detector Activation Times in a Two-Storey House Fire through CFD Modelling 

      Saunders, Julie Ann (University of Canterbury. Civil and Natural Resources Engineering, 2010)
      This report describes an investigation into the prediction of the activation times of domestic ionisation and photoelectric smoke detectors within a two storey dwelling, the work undertaken being an extension to that ...
    • A probabilistic comparison of times to flashover in a compartment with wooden and non-combustible linings considering variable fuel loads 

      Studhalter, Jakob (University of Canterbury. Department of Civil and Natural Resources Engineering, 2012)
      Prescriptive fire safety codes regulate the use of combustible room linings to reduce fire risk. These regulations are based on classification systems which designate materials according to their relative hazard when exposed ...
    • Reliability of Structural Fire Design 

      Wong, John Kee Sing (University of Canterbury. Civil Engineering, 1999)
      In general, because of the unpredictable nature of fire and the various uncertainties related, for example, to material properties at elevated temperature, the reliability of structural fire design can be justifiably ...
    • A Review of the Building Separation Requirements of the New Zealand Building Code Acceptable Solutions 

      Clarke, James M W (University of Canterbury. Civil Engineering, 1999)
      This report investigates the parameters that influence the boundary separation tables of the present New Zealand Building Code Acceptable Solutions. From an extensive literature review of theoretical and experimental ...
    • Review of the New Zealand Standard for Concrete Structures (NZS 3101) for High Strength and Lightweight Concrete Exposed to Fire 

      Inwood, Michael (University of Canterbury. Civil Engineering, 1999)
      This report describes the thermal properties, strength, and elastic modulus of lightweight, normal, and high strength concrete at elevated temperatures. Section 6 (Design for Fire Resistance) of the New Zealand standard ...
    • Risk Assessment of Transformer Fire Protection in a Typical New Zealand High-Rise Building 

      Ng, Anthony Kwok-Lung (University of Canterbury. Civil Engineering, 2007)
      Prescriptively, the requirement of fire safety protection systems for distribution substations is not provided in the compliance document for fire safety to the New Zealand Building Code. Therefore, the New Zealand Fire ...
    • Risk Ranking of Buildings for Life Safety 

      Boyes, James (University of Canterbury. Department of Civil and Natural Resources Engineering, 1997)
      A risk assessment model has been developed in the form of a checksheet using a risk ranking system to assess the fire risk of buildings in terms of life safety. This involves a simple points system which assigns scores ...
    • Saltwater Modelling of Fire Gas Flow through a Horizontal Ceiling Opening 

      Le Quesne, Marcus Andrew (University of Canterbury. Civil and Natural Resources Engineering, 2010)
      When fires occur in domestic or commercial buildings it is the smoke from the fire that leads to far more injury and death than the heat produced from the flames. Understanding the movement of smoke within the fire compartment ...
    • Should Bedroom Doors be Open or Closed while People are Sleeping? 

      Palmer, Deborah L (University of Canterbury. Civil Engineering, 1999)
      Traditionally the New Zealand Fire Service has been giving the advice to the New Zealand public that it is safer to sleep with their bedroom doors closed. The advice given is not backed up by any technical evidence that ...