Behaviour of nailed timber-plywood connections under monotonic and cyclic loading (2019)
AuthorsLi M, Lee C-L, Kho, Dshow all
Nailed timber-plywood connections are critical components in plywood shear walls to provide shear wall strength, stiffness, ductility and energy dissipation. In this study, a total of eight connection types consisting of nails with three sizes (ø2.8×60, ø3.15×75, and ø3.55×90) and plywood sheets with three thicknesses (12mm, 17mm, and 25mm) were experimentally tested under monotonic and cyclic loading. The connection properties in terms of strength, stiffness and ductility were derived based on the loadslip curves of the connections to study the influence of nail size, plywood thickness, load-grain angle and loading type on the connection performance. Experimental results showed all the connection types had very ductile behaviour under monotonic and cyclic loading. The overstrength factor of 1.6 provided in NZS 3603 was also applicable for these nailed connections with relatively thick plywood panels. It was also found that the connection strength was mainly affected by the nail size and the increase of plywood thickness from 12mm to 17mm or 25mm did not change the connection strength significantly.
CitationDarren K, Li M, Lee C-L (2019). Behaviour of nailed timber-plywood connections under monotonic and cyclic loading. New Zealand Timber Design Journal. 27(2).
This citation is automatically generated and may be unreliable. Use as a guide only.