Development and testing of an alternative dissipative post-tensioned rocking timber wall with boundary columns
The unbonded post-tensioned rocking and dissipative technology was first developed as the main outcome of the PRESSS (PREcast Seismic Structural Systems) Program in US. After the first developments and significant refinement, the technology was extended to steel and, more recently, timber structures. The timber version, referred to as Pres-Lam (Prestressed laminated) system can be either implemented for timber walls (single or coupled) or frames or combination of the above, with unbonded post-tensioning and supplemental dissipation devices. In unbonded post-tensioned dissipative wall systems a combination of re-centering capacity and energy dissipation leads to a “controlled rocking” mechanism which develops a gap opening at the wall base. This generates an uplift displacement which is transferred to the floor diaphragm. This vertical displacement incompatibility can represent a potential issue if the connection detailing between floor and lateral resisting system is not designed properly. The same issue can be mitigated by adopting an alternative configuration of the rocking/dissipative wall system, based on the use of a column-wall-column post-tensioned connection. This concept, originally proposed for precast concrete walls and referred to as PreWEC (Prestressed Wall with End Column), has been extended and adapted to post-tensioned timber structures and validated through experimental testing. The paper presents the design, detailing and experimental testing of a two-thirds scale wall specimen of this alternative configuration. Different wall configurations are considered in terms of post-tensioning initial force as well as dissipation devices layout. The experimental results confirm the excellent seismic performance of the system with the possibility to adopt multiple alternative configurations.