Anchorage of beam reinforcement in seismic resistant reinforced concrete frames. (1971)
Type of ContentTheses / Dissertations
Thesis DisciplineCivil Engineering
Degree NameMaster of Engineering
PublisherUniversity of Canterbury
This report is concerned with the behaviour of beam-column Joints of reinforced concrete frames when subjected to high intensity lateral cyclic loading such as that due to earthquake.
An experimental program was conducted to investigate the behaviour of the joints of two storey buildings. The design parameters examined were the methods of anchoring the primary reinforcing, of the beam within the column and the amount of transverse shear reinforcement. within the joint region. All three unite were subjected to the same program of static cyclic loading and the experimental moment-rotation characteristics are compared.
The joints of all three specimens proved to be inadequately reinforced to resist the large joint shears present under seismic loading conditions.
RightsAll Right Reserved
Showing items related by title, author, creator and subject.
Seismic performance of the slotted beam detail in reinforced concrete moment resisting frames. Muir, Craig Alan (University of Canterbury, 2014)During recent seismic events, traditional reinforced concrete structures that have been shown to have performed as designed have had to be demolished due to prohibitive rehabilitation costs. The main contributors to ...
The elastic behaviour of earthquake resistant reinforced concrete interior beam-column joints. Birss, B. R.This report is concerned with the theoretical and experimental study of the behaviour of interior reinforced concrete beam-column joints under simulated earthquake loading. An experimental program investigated the ...
The Effect of Support Conditions on the Fire Resistance of a Reinforced Concrete Beam Bernhart, Daniela (University of Canterbury, 2004)This report examines the behaviour of reinforced concrete beams with rectangular crosssection exposed to fire from the bottom and the sides. The study was performed with 2D finite element analysis using SAFIR. The effect ...