Now showing items 4169-4188 of 6173

    • Optical Music Recognition : Progress Report 1 

      Bainbridge, David (University of Canterbury. Computer Science and Software Engineering, 1994)
      The purpose of writing this report is to record and comment on the work done over the last year. The report will also summarise my main insights into the problem and outline future work. There were three main areas of ...
    • Optical Music Recognition: Feature Identification 

      Bainbridge, D. (University of CanterburyUniversity of Canterbury. Computer Science and Software Engineering, 1995)
      Although it has been less than a year since the last progress report, work has reached a natural ‘break-point’ offering an opportunity to describe what has been accomplished as well as gathering thoughts on the future. For ...
    • Optical Music Recognition: Progress Report 1 

      Bainbridge, David (University of Canterbury, 1994)
      The purpose of writing this report is to record and comment the work done the last year The report will also summarise my main insights into the problem and outline future work There mere three main areas of nork: staff ...
    • Optical Superlenses: Quality and Fidelity in Silver-Dielectric Near-Field Imaging Systems 

      Moore, Ciaran Patrick (University of Canterbury. Electrical and Computer Engineering Department, 2011)
      In the year 2000 John Pendry described a new kind of lens that could focus both the propagating and evanescent components of light. This ‘super’ lens, which took the form of a thin slab of silver with a negative effective ...
    • Optical vehicle tracking - A framework and tracking solution 

      Highet, Ronald (University of Canterbury, 2004)
      There are a large number of different approaches to vehicle tracking currently available. In this report we look at different problems faced when tracking vehicles, such as background subtraction and vehicle recognition, ...
    • Optical Wavefront Prediction with Reservoir Computing 

      Weddell, Stephen John (University of Canterbury. Electrical and Computer Engineering, 2010)
      Over the last four decades there has been considerable research in the improvement of imaging exo-atmospheric objects through air turbulence from ground-based instruments. Whilst such research was initially motivated for ...
    • Optimal control of energy usage at the Tasman Mill 

      Coombes, G. E. (University of Canterbury. Engineering, 1973)
      -
    • Optimal irrigation scheduling 

      Brown, Peter Derek (University of Canterbury. Civil and Natural Resources Engineering, 2008)
      An optimal stochastic multi-crop irrigation scheduling algorithm was developed which was able to incorporate complex farm system models, and constraints on daily and seasonal water use, with the objective of maximising ...
    • Optimal marine farm structures. 

      Smith, Alistair Warwick (University of Canterbury. Mathematics, 2003)
      This thesis documents a new modelling approach for assessing the interplay between marine mussels and their environment, and presents the development of multi-scale methodology for addressing the question of optimal ...
    • Optimal Mould Design for the Manufacture of High-Precision Lenses 

      Sellier, M.; Breitbach, C.; Loch, H.; Siedow, N. (University of Canterbury. Mechanical Engineering., 2006)
      The increasing need for low-cost, high-precision optical devices requires innovative manufacturing techniques or the optimization of existing ones. The present study focuses on the latter alternative and proposes a ...
    • Optimal on-farm irrigation scheduling with a seasonal water limit using simulated annealing 

      Brown, P.D.; Cochrane, T.A.; Krom, T.D. (University of Canterbury. Civil and Natural Resources Engineering, 2010)
      As water resources are limited and the demand for agricultural products increases, it becomes increasingly important to use irrigation water optimally. At a farm scale, farmer’s have a particularly strong incentive to ...
    • Optimal packetization interval for VoIP applications over IEEE 802.16 networks 

      Perera, S.; Sirisena, H.; Pawlikowski, K. (University of Canterbury. Computer Science and Software Engineering.University of Canterbury. Electrical and Computer Engineering., 2006)
      An analysis of the impact of the packetization interval for constant bit rate traffic is performed in the context of the IEEE 802.16 MAC layer (specifically in the context of IEEE 802.16d, Fixed WiMAX). Bandwidth used for ...
    • Optimal Parameter Updating for Optical Diffusion Imaging 

      Ye, J.C.; Webb, K.J.; Millane, R.P.; Downar, T.J. (University of Canterbury. Electrical and Computer Engineering, 1998)
      Because optical diffusion imaging is a highly nonlinear inverse problem, iterative inversion algorithms based on the Born approximation have usually been employed as reconstruction technique, but convergence is slow, ...
    • Optimal PEEP - the final solution: Model-based mechanical ventilation for intensive care 

      Shaw, G.M.; Chase, J.G.; Chiew, Y.S.; Damanhuri, N.S.; van Drunen, E. (University of Canterbury. Mechanical Engineering, 2012)
    • Optimal Positive End-Expiratory Pressure in Mechanically Ventilated Patients: A Clinical Study 

      Sundaresan, A.; Chase, J.G.; Hann, C.E.; Shaw, G.M. (University of Canterbury. Electrical and Computer EngineeringUniversity of Canterbury. Mechanical Engineering, 2011)
      The optimal level of positive end-expiratory pressure (PEEP) is still widely debated in treating acute respiratory distress syndrome (ARDS) patients. Current methods of selecting PEEP only provide a range of values and do ...
    • Optimal shape design based on body-fitted grid generation. 

      Mohebbi, Farzad (University of Canterbury. Mechanical Engineering, 2014)
      Shape optimization is an important step in many design processes. With the growing use of Computer Aided Engineering in the design chain, it has become very important to develop robust and efficient shape optimization ...
    • Optimal tight glycaemic control supported by differential geometric methods 

      Kovacs, L.; Szalay, P.; Benyo, B.; Chase, J.G. (University of Canterbury. Mechanical Engineering, 2011)
      Optimal control of an Intensive Care Unit (ICU) metabolic model from nonlinear control point of view is presented in the current paper. The transformation of a clinically validated nonlinear model into a series of ...
    • An optimal way of moving a sequence of points onto a curve in two dimensions 

      Powell, Michael James David (University of Canterbury. Dept. of Mathematics, 1997)
      Let s̲(t), 0 ≤ t ≤ T, be a smooth curve and let x̲i, i = 1, 2, ... , n, be a sequence of points in two dimensions. An algorithm is given that calculates the parameters ti, i = 1,2, ... ,n, that minimize the function ...
    • Optimisation based identification of cardiovascular system model parameters for patient specific diagnostic assistance 

      Smith, B.W.; Chase, J.G.; Nokes, R.I.; Coope, I.D.; Shaw, G.M. (University of Canterbury. Civil Engineering.University of Canterbury. Mathematics and Statistics.University of Canterbury. Mechanical Engineering., 2003)
    • Optimisation of a three-phase partial core inductor. 

      Morris, John H. (University of Canterbury, 2018)
      Three-limb partial core inductors are studied by observing the effects of combining three, single-limb partial core inductors in close proximity, and energising them in a 3-phase circuit. The observed effects include an ...